Mechanical joint is a time-saving, easily installed joint that insures long-term, trouble-free performance. Uncomplicated, this joint comprises a gland, gasket and bolts. It requires no mecanical skill to install, is unusully easy and fast to assemble. No special tools are required for installation other than a standard ratchet wrench. When properly installed, this joint will maintain a perfect seal indefinitely without further maintenance.
Mechanical joint is recommended for any gas, water or other fluid service, and where a virtually bottle-tight joint is a requirement. Parts are interchangeable with fitting accessories. Mechanical joint pipe is generally available thru 24" and fittings through 48".
:
The plain end of mechanical joint pipe has the same outside diameter as other push-on type joints. As a result, it can be fitted into such joints in the field merely by beveling the plain end pipe.
 |
1. Clean bell, plain end, and lubricate gasket with soapy water. The joint area must be free of dirt. |
 |
2. Slip gasket into position - assure even seating in the bell. |
 |
3. When gland is in position, insert bolts, partially tighten with fingers. |
 |
4. Tighten with standard ratchet wrench (only tool needed). Tighten bolts alternately, bottom bolt, then top bolt and so on, maintaining approximately the same distance between the gland and the face of the flange. |
